Quality is not enough if it doesn’t come with efficiency. In a production environment where every kilowatt, every minute, and every sheet counts, MAPPI presents FOX EVO — the evolution of its compact flat glass tempering furnace, designed to deliver optimal performance, maximum flexibility, and truly measurable energy savings.
FOX EVO is the natural evolution of the FOX furnace, starting with the new 24-inch display, which enabled a complete redesign of the software interface. The result is a system that is now even more intuitive, complete, and designed to give operators simple and immediate control over every phase of the process.
But it’s in energy management and operational flexibility where FOX EVO truly makes a difference. Its intelligent architecture allows power and resources to adapt to the actual needs of production, eliminating waste and optimizing every cycle. It’s this ability to “do only what’s needed, when it’s needed” that allows glassmakers to work with effectiveness, efficiency, and full cost control.
FOX EVO is also now fully compatible with the MEC ecosystem – Mappi Edge Computing, a system that provides operators with real-time production data in a clear and accessible way. With MEC INSPECTOR, it becomes possible to monitor every parameter of the production cycle, identify areas for improvement, and make faster, more informed decisions — enhancing both productivity and quality.
FOX EVO is also now fully compatible with the MEC ecosystem – Mappi Edge Computing, a system that provides operators with real-time production data in a clear and accessible way. With MEC INSPECTOR, it becomes possible to monitor every parameter of the production cycle, identify areas for improvement, and make faster, more informed decisions — enhancing both productivity and quality.
With FOX EVO, MAPPI confirms its vision for the future of glass tempering: uncompromising quality, real savings, and total process control — all in a simple and accessible way. It’s not just about producing tempered glass, but about doing it in the smartest and most sustainable way possible.
Also our FOX series raises the bar in limiting consumptions through the use of coordinated MHS, ESS and ATI systems, a Mappi exclusive.
Fox is a series of compact ovens designed for the needs of medium-small glassware; ensures high quality and cost-effectiveness, even in small series machining. Each Fox includes all distinctive and proprietary innovation of Mappi technology.
Small heating modules, for precision heating and great flexibility, through a network of sensors.
A computerized system optimize consumption and reduce the peak of installed power.
An original design for the blowing system that allows a precise control while tempering.
Allows a perfectly syncronized movement of the ceramic rolls over the whole heating room.
LOADING AREA 1050x2300 1250x3200 1500x3200
mm 1050x2300 1250x3200 1500x3200
inches 41x90 49x126 60x126
PRODUCTIVITY | LOADS / HOURCLEAR GLASS
3mm 25 25 25
4mm 24 24 24
6mm 16 16 16
10mm 9 9 9
19mm 4 4 4
LOW.E
3mm 23 23 23
4mm 19 19 19
6mm 13 13 13
8mm 9 9 9
10mm 7 7 7
AVERAGE CONSUMPTION
kW/h 115 169 233
PLANT DIMENSION
Lenght M/feet 12 / 39 16 / 52 16 / 52
Width M/feet 2,3 / 7,5 3,5 / 11,5 4 / 13
Height M/feet 2,3 / 7,5 2,3 / 7,5 2,3 / 7,5
This notice is intended to describe how personal data is managed through the website “www.mappi.it” (hereinafter the “Website”) with reference to users who access it.
Mappi International S.r.l. intends to ensure that the processing of personal data of each visitor to the Website, carried out by any means, whether automated or manual, takes place in full compliance with the safeguards and rights recognized by Regulation (EU) 2016/679 of the European Parliament and of the Council of 27 April 2016, relating to the protection of natural persons with regard to the processing of personal data and to the free movement of such data (hereinafter the “GDPR”), as well as by the other applicable data protection laws, including in relation to internet access carried out from abroad, in accordance with the provisions set out in this notice.
Unless otherwise specified and governed by a specific privacy notice provided pursuant to Article 13 of the GDPR, this notice shall also be considered as a document providing the information required under Articles 13 and 14 of the GDPR to those who browse the Website and interact with the Data Controller through the services offered by the Website.
Please note that this notice applies exclusively to the Website of Mappi International S.r.l. and does not refer to any other websites that may be consulted by the user via links and/or banners present on the Website.
The Data Controller of your personal data is Mappi International S.r.l., represented by its legal representative pro tempore, with registered office at Via A. Fieramonti, 1 – 04012 Cisterna di Latina – Italy, Tax Code/VAT No. IT02218070593, email: info@mappi.it.
The Data Protection Officer (DPO) is Dr. Donato Eugenio Caccavella, email: dpo.voilap@amicadpo.eu.
Our Website provides informational and, in some cases, interactive content. During browsing, user information may be collected in the following ways:
The IT systems and software procedures used to operate the Website acquire, during their normal operation, certain personal data whose transmission is implicit in the use of Internet communication protocols.
This category of data includes: IP addresses, browser type, operating system, domain name and addresses of websites from which access or exit was made, information on pages visited within the site, access time, time spent on each page, internal navigation paths and other parameters relating to the user’s operating system and IT environment.
Legal basis: the legitimate interest of the Data Controller in managing and administering the website, as well as improving and developing online services, pursuant to Article 6(1)(f) GDPR.
This includes all personal data voluntarily provided by the user on the Website, for example, to register and/or access restricted areas, request information about a product or service through a form, or subscribe to the newsletter service offered by the Company.
The processing of such personal data will be carried out based on the information provided in the specific privacy notices issued pursuant to Articles 13 and 14 GDPR at the time of data collection.
Legal basis: processing for this purpose is based on the performance of a contract or pre-contractual measures pursuant to Article 6(1)(b) GDPR. For the newsletter service, the legal basis is the freely given consent of the data subject pursuant to Article 6(1)(a) GDPR.
In certain cases, personal data may be processed for profiling purposes through cookies. Such processing will be carried out in accordance with the Cookie Policy available on the Website, within the limits of the consent provided by the user pursuant to Article 6(1)(a) GDPR.
Legal basis: for non-technical cookies, the legal basis is the freely given consent of the data subject pursuant to Article 6(1)(a) GDPR.
Personal data is processed using IT tools suitable to ensure data security and confidentiality and in compliance with the security measures deemed appropriate by the Data Controller pursuant to Article 32 GDPR.
Data may be processed both manually and by automated means, with or without electronic tools, in accordance with the principles of fairness, lawfulness and transparency.
Personal data may also be processed by authorized personnel who need to access it for the performance of their duties, or by external parties providing services on behalf of the Data Controller (e.g. IT system management), duly appointed as Data Processors or acting as independent Data Controllers.
Personal data may be transferred to countries outside the European Economic Area where necessary in relation to the use of third-party services (such as, by way of example, hosting services, website management platforms, statistical analysis services, marketing tools or social media services).
In such cases, transfers will be carried out in compliance with Articles 44 et seq. of Regulation (EU) 2016/679 (GDPR) and only in the presence of an adequacy decision by the European Commission or through the adoption of appropriate safeguards, such as Standard Contractual Clauses (SCCs) or other legal instruments ensuring a level of protection substantially equivalent to that guaranteed within the European Union.
The Data Controller adopts appropriate technical and organizational measures to ensure the security and confidentiality of personal data, including in the event of transfers to third countries.
Personal data collected will be stored, in accordance with Article 5 GDPR, for a period not exceeding that necessary to achieve the purposes for which it is collected and for the maximum period required by law.
In particular, personal data will be processed for the minimum period necessary, as indicated in Recital 39 GDPR, i.e. until the termination of the relationship between the data subject and the Data Controller, without prejudice to any additional retention period required by law, as provided for by Recital 65 GDPR.
Further details on specific retention periods for each type of processing will be provided in the privacy notice issued at the time of data collection.
As provided for in Article 15 GDPR, the data subject may access their personal data, request rectification or updating if incomplete or inaccurate, request erasure where data has been processed unlawfully, and object to processing for legitimate reasons.
In particular, the data subject may exercise the following rights at any time:
Right of access (Art. 15 GDPR)
Right to rectification (Art. 16 GDPR)
Right to erasure (Art. 17 GDPR)
Right to restriction of processing (Art. 18 GDPR)
Right to data portability (Art. 20 GDPR)
Right to object (Art. 21 GDPR)
Right to lodge a complaint with a supervisory authority
To exercise these rights, the data subject may contact the Data Controller or the DPO at: dpo.voilap@amicadpo.eu
The services provided by this application are intended for a general audience and are not directed at children under the age of 14.
The Data Controller does not knowingly collect personal data from users under this age. In the event that such data is provided, it will be promptly deleted.
This notice applies to the Website from the date of its publication and supplements the privacy notices provided during each data collection phase.
The introduction of new regulations or updates to the Website may require changes to this notice. Users are therefore invited to periodically review this page.
Any changes to the privacy notices provided during data collection will be communicated to the data subjects in the manner determined by the Data Controller.
In accordance with applicable data protection regulations, through this cookie policy, Mappi International S.r.l., represented by its Legal Representative, as Data Controller, intends to provide users with all relevant information regarding the cookies used by the website www.mappi.it.
This notice, whose scope is limited to the above-mentioned website, forms an integral part of the corresponding Privacy Policy, to which we refer for further information.
1. What are cookies
Cookies are small text files (letters and/or numbers) that the website www.mappi.it stores on your computer or mobile device while you browse it. They contain information that may be reused during the same visit or in subsequent visits, even after several days.
Mappi International S.r.l., as Data Controller, may use:
• cookies to make its services easy to navigate and to ensure efficient use of web pages;
• cookies that improve the service provided to users, making it more effective and/or enabling specific functionalities;
• cookies sent by third-party websites or web servers (“third-party cookies”), on which certain elements (such as images, maps, sounds or specific links to pages on other domains) available on the page visited by the user may reside.
2. How we use cookies
Mappi International S.r.l., as Data Controller, uses necessary, functional, profiling and social media-related cookies. In particular:
• Technical cookies (not requiring consent), namely session or navigation cookies that allow access to services available for each type of user and enable customization of the interface and website functionalities;
• Functional or preference cookies, used to recognize and remember user preferences and allow access to a version of the website based on predefined criteria such as the selected language;
• Profiling and analytical cookies, aimed at creating user profiles to send advertising messages in line with the preferences expressed during web browsing; statistical analysis cookies collect data which, if not anonymized, may allow user profiling;
• Social network cookies, i.e. cookies installed by social media buttons (Facebook, Twitter, Vimeo, etc.). When the user interacts with one of these plugins by clicking the relevant icon, the website connects, through the user’s browser, to the servers hosting the social sharing services, transmitting the data the user intends to publish and share through their social profile. The user remains solely responsible for their social account. Following this action, the servers of the pages visited may share the expressed preference. To avoid this, users should refrain from sharing content via the above-mentioned plugins. For further details on data collection and processing through social plugins, users are invited to consult the privacy policies provided by the respective service providers.
3. Cookie duration
Some cookies (session cookies) remain active only until the browser is closed or the logout command is executed. Other cookies remain active even after the browser is closed and are available during subsequent visits. These are called persistent cookies, and their duration is set by the server when they are created.
While browsing the website, users may interact with third-party websites that may create or modify persistent and profiling cookies. For further details, users are invited to consult the summary table below.
4. Cookie management
Users can decide whether or not to accept cookies through the cookie banner settings. The complete or partial disabling of cookies may affect the use of website functionalities, but will not prevent navigation.
Further information may be requested by contacting the Data Controller at: info@mappi.it
5. How to disable cookies (opt-out)
Users can manage their cookie preferences by selecting their preferred option directly in the cookie banner. Subsequently, they may modify their consent at any time by accessing the cookie section available on the website. These settings allow, for example, preventing third parties from collecting data.
Through browser settings, users can delete installed cookies, including those used to store consent preferences.
Information on how to manage cookies for the most common browsers can be found at:
6. Data subject rights
At any time, you may exercise your rights towards the Data Controller pursuant to Articles 15–22 of Regulation (EU) 2016/679 (GDPR), including the right of access, rectification, completion and, where applicable, data portability, as well as the right to obtain erasure, restriction or objection to processing for legitimate reasons, and to object to automated decision-making, including profiling.
To exercise the above rights, without prejudice to the right to lodge a complaint with the supervisory authority, the data subject may contact the Data Controller through one of the following methods:
• in person at the registered office: Via A. Fieramonti, 1 – 04012 Cisterna di Latina (LT), Italy
• by email: info@mappi.it
• by email (DPO): dpo.voilap@amica.dpo
To ensure the protection of personal data, additional information may be requested to verify the identity of the requesting data subject.
Requests to access personal data (or to exercise any of the above rights) are free of charge. However, if the request is manifestly unfounded or excessive, a reasonable fee may be charged or the request may be refused.
7. Right to lodge a complaint
Data subjects who believe that the processing of their personal data is in breach of the GDPR have the right to lodge a complaint with the supervisory authority pursuant to Article 77 of the GDPR, or to take legal action pursuant to Article 79.
8. Updates to this policy
Mappi International S.r.l. will keep this policy constantly updated and will publish the updated version on its website.
Last update: 19/03/2026
9. List of cookies used by the website
| Type | Name | Provider / Domain | Description | Duration |
| Technical | XSRF-TOKEN | Provides protection against CSRF (Cross-site request forgery) attacks | 2 hours | |
| Technical | laravel_session | Used to identify a user session instance | 2 hours | |
| Analytics | _ga | Google Analytics (https://policies.google.com/technologies/partner-sites) | Used to distinguish users by assigning a randomly generated identifier | 2 years |
| Analytics | _gid | Google Analytics | Used to generate statistical data on website usage | 2 hours |
| Analytics | _dc_gtm_UA-* | Google Analytics | Used to manage navigation tracking information | 1 minute |
| Statistical | _ga_* | Google Analytics | Used to count visits and measure website performance | 2 years |
| Social Network | _fbp | Facebook Pixel (facebook.com) | Used by Facebook to deliver advertising products such as real-time bidding | 90 days |
Somec represents a clear example of what is associated in the world with the idea of Made in Italy: resourcefulness, passion for innovation, taste for beauty, relentless pursuit of perfection.
Window Creations Architectural Glass Division from Ottoville, Ohio, USA, is leading the art glass industry in innovation and technology.
The history of Tecnoglass begins in 1963. Year after year it invests in technologies, skills, innovations. Today his specialization is in the production of laminated, tempered and insulating glass.
The name Formator derives from a Latin word, which means “he who creates, he who invents”. Formator was born to produce and process special glasses. The immediate goal was to produce in order to export towards foreign markets and to focus on high-end projects.
Vitralum Glass Solutions is a “Frameless Glass Specialist” company in Central Florida, Orlando’s top pick with expert designers, prodigious architectural firms and successful construction companies, as well as thousands of home owners who have purchased from the company over the years.
Mappi doesn’t stop. Also today a new installation is going to begin in the United States, the first containers arrived and another Mappi tempering furnace will soon be operating.
Mappi International states that all activities in Italy proceed at normal pace:
